In the GISLayer software, raster data can be visualized. Raster data can be uploaded into the system in two different ways, from URL and local files.

The raster data uploading panel is accessed by clicking on the "Add Image" option under the "Add Raster" button on the "data" panel.

Step 1: Add Local File

In the panel opened after clicking the option to add a picture, the 'Upload from Computer' option should be selected. With the help of the add file button, you can upload a file saved on the computer to the system. File extensions that you can upload are shown below.

1. Png

2. Gif

3. Jpg

4. Jpeg

5. Tiff

6. Geotiff

<![if !supportLists]>1.1. <![endif]>Add Image

Coordinate system and corner coordinates of the attached image must be entered.

Corner coordinates can be taken from the map by using the buttons on the edge. It is added to the map with the Add button.

1.2. Add GeoTIFF

If the GeoTIFF file is added, the corner coordinates and coordinate system of the photograph are automatically taken and displayed in the panel.

If there are at least 3 bands in the image to be uploaded, you must show the RGB bands.

After the settings are completed, it is added to the map with the Add button.

Step 2: Add Files via URL

The same file types added over the local file can also be added via the URL. "Promote URL Address" option is selected to add images via URL.

2.1. Adding Image via URL Address

After entering the URL address, the coordinate system and corner coordinates of the picture are entered. It is then added to the map with the Add button.

2.2. Adding GeoTIFF via URL Address

After the GeoTIFF URL address is entered, the 'Get' button on the side is clicked. The coordinate system, corner coordinates and band information of the GeoTiff File are automatically obtained through this button.

After making the band selections, it is added to the map with the Add button.